SENW58C Wall Temp with Display & Adj. Wall Sensor with Display Setpoint Adjust & Over-ride.. Product #: SENW58C-AU

SENW58C Wall Temp with Display & Adj.

Product Code: SENW58C-AU
- +

 SENW58C Wall Mounted Temperature Detector Celsius model with display, setpoint adjustment and override



  • Icon based backlit Liquid Crystal Display (LCD)
  • Modern, attractive enclosure design
  • Wall mounted
  • Displays Temperature and Setpoint at a glance
  • Onboard temperature sensor
  • Displays Celsius (°C) or Fahrenheit (°F)
  • Push button interface for:
    1. Temperature setpoint adjustment
    2. Occupancy override


Power Input 24VDC or 24VAC ±10% @ 50/60Hz Note
Power Consumption 10mA @24VDC (80mA w/ backlight on)
Note Polarity MUST be observed when connecting power.
Note If using 24VAC, the data and power cabling should be segregated and data run in screened cable (as shown on page 5 of datasheet).
Operating Temperature 0°C to 40°C (32°F to 104°F) non-condensing
Storage Temperature 0°C to 50°C (32°F to 122°F) non-condensing
Housing is moulded from flame retardant plastics recognised by UL as UL94-V0. The housing is designed to maximise airflow to the onboard sensors. It should be mounted with a standard vertical C-Clip, or on a standard wall enclosure.
Color Grey / White
Dimensions (Maximum)             (W)70mm x (H)121mm x (D)41mm             [2.76" x 4.76" x 1.6"]
EN61326-1:2013 for CE Marking and RCM Labelling
Title 47 CFR, Part 15, Subpart B, Class A for FCC Verification

Onboard Sensor

Resistance             NTC 10,000Ω thermistor (10K-2)
Accuracy ±0.2°C (0.36°F)                         from 0 to 70°C (32 to 158°F)

Inputs and Outputs

Temperature Temperature (Temp) Resistance, 10K-2 thermistor (Isolated)
Setpoint (STPT) 0 to 10VDC = configurable setpoint signal (ref. to power GND)
Occupancy (OVR) Occupied = 10VDC ("Man" displayed)                         Unoccupied = 0VDC ("Man" not displayed)                         (ref. to power GND)

Controls and Display

Setpoint Up and Down Buttons Down arrow Up arrow
Override / Select Single Button Power button
Backlit LCD for Temperature, Setpoint and Override
Primary Display Four Numeric Digits 19mm (0.75") high with one selectable decimal
Secondary Display Four Numeric Digits 12.7mm (0.5") high with one selectable decimal
Icons SET / Person / Thermometer
Display Size (Width x Height) 40mm x 30mm (1.6" x 1.2")
Digit Resolution 0.1, 0.5 or 1
Units °C , °F
Temperature Offset Range ±10


SENW58C Datasheet PDF(.pdf  3.26 MB)

Emtrol Quote

Quote Cart

0 Item(s)
Your quote cart is empty!
copyright © Emtrol Pty Ltd. All Rights Reserved.

Shop Search